1989 Ford Bronco Sticking - Windows & Glass

Question: The power rear window is not aligned and tilts slightly causing the window to rub when going up or down. Can this be adjusted or do I have to replace the window gear assembly. Thanks for your help.

Here's How To Get Guaranteed Solutions In Minutes

Technican: Hi; You should be able to adjust the track on the sides. There should be two bolts on the sides. Just take them loose and the push the track towards the window and retighten. Also you might want to try putting some silicone on the tracks. A dry track will cause the window to stick and slightly tilt. .

Owner: I tried loosening the bolts but there didn't seem to be any room for adjustment up or down. I didn't think to push the track in. I also tried silicone spray, but that didn't help ease the sticking problem that starts when the window is about half way up. I thought the gear assembly might be out of alignment. Is the gear assembly unable to be adjusted? Thanks again.

Technican: Hi; The gear assembly can be adjusted. Take the three bolts holding the motor loose and operate the window up and down. Then tighten the bolts back up when the window is in the down position. See if this fixes your problem.

Here's How To Get Guaranteed Solutions In Minutes

More Bronco Answers

Home

Ford Answers

Aerostar
Aspire
Bronco
Bronco II
Club Wagon
Contour
Country Squire
Crown Victoria
E 150
E 250
E 350
Econoline
Escort
Expedition
Explorer
F 100 Pick up
F 150 Pick up
F 250 Pick up
F 350 Pick up
Falcon
Festiva
Fiesta
Focus
Granada
LTD
Lightning Pick up
Mustang
Mustang Convertible
Mustang GT
Mustang Mach I
Mustang Notchback
Mustang Sedan
Probe
Ranger
Ranger Pick up
Sedan
Taurus
Tempo
Thunderbird
Touring
Windstar
ZX2
a_old

Home

template