|
1991 Ford Explorer Other - Drive Train & Driveline
Question: I just purchased a 91 explorer XL, auto hubs, electric 4x4 shift, and according to the door panel 373 gears and posi. The Explorer run fine and when I put it in low range, it seems to be in a lower gear. I have 2 questions:
1) I was changing the rear ujoints, while the rear drive line was out, I decided to verify that the 4 wheel drive worked. I placed it in 4x4 and tryed to drive it and nothing happened. No noise or nothing.
Do I have a problem?
2) Also after I replace the u-joints and reinstalled the drive line, rear tires off the ground and in park, I can turn by hand the back tires and they both turn in opposite directions, but the drive line did not turn. Everything seems to work correctly while driving and park works fine even on a hill. Do I have a rear end problem or is that from this type of posi?
Thanks
Jerry
Here's How To Get Guaranteed Solutions In Minutes
|
|
