|
|
Technican: Can you remove the trim and expose the hand brake handle assembly? You should see a switch at the base of the hand brake that is actuated when you move the handle. That will be the switch that needs adjusted or replaced. If you have had fluid (pop, tea, coffee, etc.) spill into this area the switch may be sticking. Sometimes cleaning and aligning the switch will be all that is needed to restore reliable operation.
A new switch may be an affordable way to give you the best confidence in your repair efforts. The switch is likely a dealer item.
Owner: the hand brake must be set before the top can be lower, the hand brake itself work but indicator
light in the dash sometime will not come on so the top will not go down
Technican: Hello, What are you saying here? Are you supposed to set the Parking Brake before the top will move?
Please advise.
Technican: Hello, Please let me hear from you.
Technican: Hello, Please let me hear from you.
"
Technican: Hello, please update the status of your question.
Technican: This question has remained open for over 50 days. Are you ready to close it? Still need/want help? Here's How To Get Guaranteed Solutions In Minutes
|
